Related Manuals for Clarke PRO12C
Summary of Contents for Clarke PRO12C
-
Page 1: Spray Gun
SPRAY GUN SPRAY GUN MODEL NO: PRO12C/PRO14C/PRO18C PART No: 3090005/3090010/3090015 OPERATION & MAINTENANCE INSTRUCTIONS 0903... - Page 2 - 1 - - 14 -...
- Page 3 CLARKE GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.
- Page 4 NSPRO12C33 NSPRO12C33 Please note that the details and specifications contained herein are correct at the time of going to print. However CLARKE International reserve the right to change specifications at any time without Part not shown prior notice. - 3 -...
- Page 5 SAFETY PRECAUTIONS PARTS DIAGRAM WARNING Compressed air can be dangerous. Ensure that you are thoroughly familiar with all precautions relating to the use of compressors and compressed air supply. For your personal safety and that of others around you. Follow these safety instructions carefully.
- Page 6 GENERAL ARRANGEMENT NOTES Wings Spray Nozzle Fan Control Fluid Control Paint Cup Vent Paint Cup Locking Lever Air Supply Air flow Control Paint Cup AIR SUPPLY Pro-Gun spray guns are available with three nozzle sizes, 1.2mm, 1.4mm, and 1.8mm. The larger the nozzle, the more compressed air is needed.
- Page 7 PAINT SPRAYING HINTS Cont USING THE SPRAYGUN Pro-Gun spray guns are fed with paint by a siphon (or suction) effect from the paint cup. To obtain best results, it is vital that the surface to be sprayed is well prepared. It must be clean, free from dust, dirt and grease.
- Page 8 PAINT SPRAYING HINTS MAINTENANCE WARNING WARNING NEVER attempt to spray unless you are wearing suitable, approved Disconnect the spray gun from the air supply, and relieve any pressure in the respiratory and eye protection. gun and hose, before any disassembly. REMEMBER that some modern paints require specialist respiratory protection...always consult the paint manufacturers instructions.