P Program Ae - Canon PowerShot G6 User Manual

••
Camera settings such as shutter speed and aperture value can be
freely changed for shooting.
See Functions Available in Each Shooting Mode (p. 206) at the
end of this manual to find out which settings can be changed
in which shooting modes.
CIlell .
~
• Please see
m>
Auto Mode (p. 55) for shooting procedures
L.iJ
once you have changed a setting.
P
Program AE
Use the program AE mode to have the camera automatically set the
shutter speed and aperture value to match the brightness of the
scene.
1
Turn the mode dial to P.
2
Shoot the image.
• The shutter speed and aperture value will
be set automatically and shown on the
display panel. The shutter speed and
aperture will also be displayed on the
LCD Monitor if the monitor is on.
• The correct exposure has been set if the
shutter speed and aperture value appear
in white on the LCD monitor.
• You can change the automatically
selected combinations of shutter speeds
and aperture values without altering the
exposure (p. 106).
80
~J
(25D L/.D
L
LJ
~
• In
fU
-2 •• 1••••• 1 •• 2+
•