Settings For The Audio - Sony DAV-DZ340K Operating Instructions Manual

x [CONTROL FOR HDMI]
This function is available when you connect the
system and TV that is compatible with the
Control for HDMI function with an HDMI
cable.
[ON]: On. You can operate mutually between
components that are connected with an HDMI
cable.
[OFF]: Off.
x [AUDIO RETURN CHANNEL]
This function is available when you connect the
system and TV that is compatible with the Audio
Return Channel function.
[AUTO]: The system can receive the digital
audio signal of your TV via an HDMI cable
automatically.
[Off]: Off.
Note
• This function is available only when [CONTROL
FOR HDMI] is set to [ON].
x [YC
C /RGB (HDMI)]
B R
You can select the type of HDMI signal output
from the HDMI OUT jack.
[YC C ]: The system outputs YC
B R
[RGB]: The system outputs RGB signals.
x [AUDIO (HDMI)]
You can select the audio output status from the
HDMI OUT jack.
[OFF]: The system does not output sound from
the HDMI OUT jack.
[ON]: The system outputs audio signals by
converting Dolby Digital, DTS, or 96 kHz/24-
bit PCM signals to 48 kHz/16-bit PCM.
Note
• When you set the function to other than "DVD/CD"
or "USB," the system does not output the sound from
the HDMI OUT jack even if you set [AUDIO
(HDMI)] to [ON].
60
GB
x [JPEG RESOLUTION]
You can select the resolution of JPEG image
files output from the HDMI OUT jack.
[SD
resolution with a black frame.
[HD
with a black frame.
[HD]: The system outputs the HD resolution
without a black frame.
[(1920 × 1080i) HD
full size HD resolution with a black frame.
[(1920 × 1080i) HD]: The system outputs full
size HD resolution without a black frame.
Note
• [JPEG RESOLUTION] is effective only when you
set [TV TYPE] in [VIDEO SETUP] to [16:9], and
you set [HDMI RESOLUTION] in [HDMI SETUP]
to other than [720 × 480p] or [720 × 480/576p].
• You can select [(1920 × 1080i) HD
1080i) HD] only when you set [HDMI
RESOLUTION] in [HDMI SETUP] to [1920 ×
1080i].
• The HDMI signal will stop momentarily when:
C signals.
B R
x [AUDIO DRC]
You can compress the dynamic range of the
sound track. [AUDIO DRC] is useful for
watching movies at low volume late at night.
[OFF]: No compression of dynamic range.
[STANDARD]: The system reproduces the
sound track with the kind of dynamic range that
the recording engineer intended.
[MAX]: The system compresses dynamic range
fully.
Note
• [AUDIO DRC] works only for Dolby Digital.
]: The system outputs standard
]: The system outputs HD resolution
– the system is loading or unloading a DATA CD or
DATA DVD.
– you connect or remove a USB device.

Settings for the audio

[AUDIO SETUP]
]: The system outputs
] or [(1920 ×