Sound Effect; Selecting The Effect To Suit The Source - Sony DAV-DZ340K Operating Instructions Manual

Sound Effect

Selecting the Effect to
Suit the Source
The system has six pre-programmed sound
modes to suit the source or playback situation.
You can achieve the maximum sound effect of
the original source by simply selecting one of
the sound modes.
Press SOUND MODE repeatedly until the
desired mode appears in the front panel
display.
• "STANDARD": The system automatically
selects a sound effect suitable for movies or
music, depending on the source.
• "CLEAR VOICE": The system outputs sound
using dialog enhancement for voices that are
easier to hear.
• "MOVIE": The system outputs sound suitable
for movies. If the original source is 2 channel,
the system simulates surround sound by using
the Dolby Pro Logic decoding system, and
outputs the sound from all speakers.
• "HI-FI": The system outputs sound suitable
for music. You can enjoy the accurate sound of
the original source.
• "BGM": The system outputs the same sound
across the entire room. You can enjoy this
mode, for example, in the large party room.
• "2CH STEREO": The system outputs sound
from the front speakers and the subwoofer
regardless of the original numbers of channels.
If the original source is multi-channel, the
system downmixes it to 2 channels.
Note
• Depending on the source, the sound mode may not be
effective.
48
GB
Reinforcing bass frequencies
Press DYNAMIC BASS.
"BASS ON" appears in the front panel display.
To turn off the sound effect
Press DYNAMIC BASS again.
Enjoying sound quietly
You can compress the dynamic range of non-
dialog sound. This effect is useful for watching
movies at night.
Press NIGHT.
"NIGHT ON" appears in the front panel display.
To turn off the sound effect
Press NIGHT again.