Sony DAV-DZ340K Operating Instructions Manual page 31

To select the type of video signal
output from the COMPONENT
VIDEO OUT jacks
(DAV-DZ640K/DAV-DZ840K/DAV-
DZ940K only)
When you connect the unit and your TV with a
component video cable, select the type of video
signals output from the COMPONENT VIDEO
OUT jacks.
1
Press FUNCTION repeatedly to select
"DVD/CD."
2
Press DISPLAY while the system is
in stop mode.
3
Press X/x to select
then press .
CUSTOM
4
Press X/x to select [CUSTOM], then
press .
CUSTOM
CUSTOM
QUICK
5
Press X/x to select [VIDEO SETUP],
then press .
VIDEO SETUP
TV TYPE:
PROGRESSIVE
(COMPONENT OUT)
4:3 OUTPUT:
COLOR SYSTEM
(VIDEO CD)
PAUSE MODE:
[SETUP],
16:9
: OFF
FULL
: AUTO
AUTO
6
Press X/x to select [PROGRESSIVE
(COMPONENT OUT)], then press
VIDEO SETUP
TV TYPE:
PROGRESSIVE
(COMPONENT OUT)
4:3 OUTPUT:
COLOR SYSTEM
(VIDEO CD)
PAUSE MODE:
7
Press X/x to select the desired setting,
then press .
VIDEO SETUP
TV TYPE:
PROGRESSIVE
(COMPONENT OUT)
4:3 OUTPUT:
COLOR SYSTEM
(VIDEO CD)
PAUSE MODE:
• [OFF]: The system does not output
progressive signals. Select this setting
when:
– your TV does not accept progressive
signals, or,
– your TV is connected via jacks other
than the COMPONENT VIDEO OUT
jacks.
• [ON]: The system outputs progressive
signals. Select this setting when:
– your TV accepts progressive signals,
and,
– your TV is connected via the
COMPONENT VIDEO OUT jacks.
When you select [ON], the confirmation
display appears. Follow the Steps below.
8
Press C/c to select [START], then
press .
The system outputs a progressive signal for
about 5 seconds. Check that the screen is
displayed correctly.
9
Press C/c to select [YES], then press
.
The system outputs a progressive signal.
When you select [NO], the system does not
output a progressive signal.
.
16:9
: OFF
FULL
: AUTO
AUTO
16:9
: OFF OFF
FULL ON
AUTO
:
AUTO
31
GB