Set Date/Time - AT&T CL83210 Abridged User Manual

Telephone settings
Telephone base settings

Set date/time

The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day of
the week can be calculated from the caller ID information.
1. When the telephone base is in idle mode, press MENU/
main menu.
2. Press or
CID
3. Press or
CID
the number using the dialing keys.
4. Press or
CID
number using the dialing keys.
5. Press or
CID
keys, then press
6. Press or
CID
number using the dialing keys.
7. Press or
CID
the number using the dialing keys.
8. Press or
CID
/SELECT
MENU
Note: If the clock is not set when a message is recorded, the system announces, "Time and day not set," before it
plays the message.
to scroll to Set date/time, then press
DIR
to select the month, then press
DIR
to select the day, then press
DIR
to select the year, or enter the number using the dialing
DIR
/SELECT to move on to set the time.
MENU
to select the hour, then press
DIR
to select the minute, then press
DIR
to select AM or PM, or press 2 for AM or 7 for PM. Press
DIR
MENU
MENU
MENU
21
to enter the
SELECT
/SELECT.
MENU
/SELECT, or enter
/SELECT, or enter the
/SELECT, or enter the
/SELECT, or enter
MENU