Table of Contents
Advertisement
Getting started
Telephone base and charger installation
Install the telephone base and charger, as shown below.
Telephone base installation
Plug the large end of the telephone
base power adapter into a power outlet
not controlled by a wall switch.
Route the power adapter
cord through these slots.
Raise the antenna.
Charger installation
Plug one end of the telephone line cord
Plug the small end of the telephone base
power adapter into the power adapter jack
on the back of the telephone base.
Plug the power adapter into a power outlet not
controlled by a wall switch.
7
If you have DSL high-
speed Internet service,
included) is required.
Route the telephone line
cord through this slot.
Plug the other end of the
telephone line cord into the
telephone jack on the back
of the telephone base.
Advertisement
Table of Contents
