Table of Contents
Advertisement
Appendix
Adding and registering handsets/headsets/speakerphones
Your telephone can support up to 12 DECT 6.0 cordless handsets (AT&T model
CL80119, sold separately) or up to 10 cordless handsets and two cordless
headsets or speakerphones (sold separately). Visit
www.telephones.att.com/accessories
6.0 cordless headsets and speakerphones. Each new handset, headset or
speakerphone must be registered to the telephone base before use. You must
register each handset, headset or speakerphone separately.
To register a cordless headset or speakerphone to this telephone system,
please refer to the corresponding user's manual for details. To register a
cordless handset, see below.
The handsets provided within your product box are already registered as
HANDSET 1, and so forth. Additional handsets are assigned numbers in the
sequential order they are registered (up to HANDSET 12).
Register a handset to the telephone base
1. Before you begin registration, make sure the handset is out of the telephone
base or charger and shows To register HS, see manual.
2. Put the handset you wish to register on the telephone base cradle.
3. Both the handset and the telephone base show Registering... Please wait
and the IN USE light on the telephone base turns on. HANDSET X Registered
appears on the handset screen (HANDSET represents the handset name, X
represents the handset number). Both the handset and the telephone base
beep and the IN USE
telephone base.
If registration fails, the system will automatically try to register again. If
screens. The handset shows To register HS, see manual and the telephone base
again from Step 1.
Notes:
You cannot register a handset if any other system handset is in use.
If you try to register more than 12 handsets to the telephone base, the telephone base shows Registration slots are full and
sounds two beeps.
for a list of compatible DECT
Registration Failed appears on both
89
Advertisement
Table of Contents
