Table of Contents
Advertisement
Answering system
Message playback
Press
/PLAY/
playback.
If there are new and old messages, press
msgs or Play old msgs, then press
If there are only new or only old messages, they will play automatically.
1. When the handset is in idle mode, press MENU/
2. Press
/SELECT again to select Play messages.
MENU
If there are new and old messages, press
msgs or Play old msgs, then press
If there are only new or only old messages, they will play automatically.
Options during playback
Press
/VOL/
Press /SKIP to skip to the next message.
Press /REPEAT to repeat the message. Press twice to hear the previous
message.
Press
/DELETE to delete the message.
MUTE
Press
/
PLAY
Press
/SPEAKER to stop playback. The screen shows Call back?, then
press
/SELECT, or
MENU
number is available. If the dialing format used is not correct, then use the
option, as mentioned below, to choose the correct dialing format before
calling back the caller.
Press
/SELECT to pause playback and show the caller ID information,
MENU
if available. From here, you can press # (pound key) repeatedly to show the
desired dialing option, then press
can also press CANCEL to resume playback. If you do not call back within ten
seconds, message playback resumes automatically.
. Press
/
STOP
to adjust the message playback volume.
/STOP to stop playback.
/SPEAKER to call back the caller if the caller's
/STOP again to end the message
PLAY
CID
SELECT or
MENU/
SELECT
SELECT.
MENU/
/SPEAKER to call back the caller. You
84
or
to select Play new
DIR
/PLAY/STOP.
to enter the main menu.
or
to select Play new
CID
DIR
Advertisement
Table of Contents
