lopital Nemo Cleaning And Disinfection Protocol page 39

Cleaning protocol
Cleaning
1. Clean the Lotus with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
2. Wipe the entire Lotus from top to bottom. Do not use a dripping wet cloth. For easy access to all
parts of the Lotus, adjust the legs to both the wide and narrow position.
3. Pay extra attention to the following surfaces:
Seat parts
-
Lower leg supports
-
Frame (especially where the user holds)
-
Handles
-
Foot plate
-
Pedals leg spread
-
Wheels
-
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
4. Repeat the cleaning protocol - Cleaning after reading "Applying common cleaning/disinfectants to
Lopital products" on page 3 of this document. Follow the manufacturer's directions for proper use
of the disinfectant.
5. After disinfecting the Lotus, wipe the Lotus with a damp cloth and clean water to remove any
residue from the disinfectant.
38 | Cleaning and disinfection protocol