lopital Nemo Cleaning And Disinfection Protocol page 25

Cleaning protocol
Cleaning
1. Clean the seat with a damp cloth with warm water and an institution-approved neutral detergent.
A soft brush can be used to remove stains and stubborn dirt.
2. Wipe the entire chair from top to bottom. Do not use a dripping wet cloth.
3. Pay extra attention to the following surfaces:
Backrest
-
Seat (also underside, the seat is removable)
-
Footrests
-
Armrests
-
Handles
-
Bedpan guides
-
Wheels
-
You can also use a cleaning unit/cleaning system to clean your chair. The temperature in the system should
be a maximum of 55°C.
Disinfecting
4. Repeat the cleaning protocol - Cleaning after reading "Applying common cleaning/disinfectants to
Lopital products" on page 3 of this document. Follow the manufacturer's directions for proper use
of the disinfectant.
5. After disinfecting the chair, wipe the chair with a damp cloth and clean water to remove any
residue from the disinfectant.
The bedpan should be cleaned and disinfected in a bedpan washer after use.
The bedpan washers/disinfectors are highly suitable for proper cleaning and disinfection of the bedpan.
Bedpan washers/disinfectors have been developed to prevent the spread of pathogens, thus protecting not
only patients or clients, but also staff. For example, in addition to cleaning, the machines perform a thermal
disinfection in accordance with current guidelines and recommendations. This guarantees the highest
hygiene standards.
24 | Cleaning and disinfection protocol