Light Group 4 Configuration & Control; Scene Definitions For Power Button - Honeywell TR80UWD Installation And Operating Manual

3. 11. 5 Light Group 4 configuration & control
The group 3 configuration parameters are explained in below table. Refer lighting group1 for
explanation.
Register
type
Holding
Holding
Holding
Holding
The group 3 control parameters are explained in below table. Refer lighting group1 for
explanation.
Register
type
Holding
Holding
Input
Input

3. 11. 6 Scene definitions for Power Button

Wherever the power button function isto turn lights on/off (see register 2110/2111, config
parameter 108/109), the wall module will need to know what scenes to recall for that purpose.
Set to zero if no such scene is configured on the DALI side. If set to zero, TR80 will send abso-
lute light level commands (0% / 100%) to turn lights off / on.
Register
type
Holding
Holding
53
Relative Absolute
Dir
Address Address
2314 42315 R/W
2315 42316 R/W
2316 42317 R/W
2317 42318 R/W
Relative Absolute
Dir
Address Address
1306 41307 R/W
1307 41308 R/W
306 30307 R/W
307 30308 R/W
Relative Absolute
Address Address
2318 42319 R/W
2319 42320 R/W
Config
Name
Parameter
Light Group 4
314
allow dimming
Light Group 4
315
min level
Light Group 4
316
max level
Light Group 4
317
max Scene No
Name
Light Group level feedback
Light Group last scene feedback
Light Group 4 new level
Light Group 4 new scene
Dir Name
Scene For Lights ON
Scene For Lights OFF
TR80 - Installation and Operation Guide
Unit Range
0: only on/off
enum control
1: allow dimming
% 0...100%
% 0...100%
int 0-16
Unit Range
% 0-100%
int 0-15
% 0-100%
int 0-15
Config
Unit Range
parameter
318 Int -1 - 16
319 Int -1 - 16
Default
value
1
1%
100%
4
Default
value
32768
(invalid)
0
32767
32767
Default
value
-1
-1