Controlling Blinds; Do-Not-Disturb / Make-Up-Room - Honeywell TR80UWD Installation And Operating Manual

2.11 Controlling Blinds

User can set slat angle, set blind position, toggle between the blinds and switch
between 0% and last set value. The procedure to set the blind control is as follows:
1. Tap
2. Tap
3. Long press
4. Tap
5. Tap

2.12 DO-NOT-DISTURB / MAKE-UP-ROOM

A hotel guest can activate Do-not-Disturb or Make-up-Room functions by tapping
the DnD/MuR Key.
30
in Ready mode, to enter in blind control mode.
The display shows current blind position in the lower display area and the cur-
rent slat angle in the upper area.
, to change slat angle.
to switch the blinds between fully closed & current position.
, to exit this mode.
, to change blind position.
TR80 - Installation and Operation Guide