Remove The Solid-State Drive (Ssd) Module - Lenovo 82R7007TGE Hardware Maintenance Manual

Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove three screws then remove the battery pack.
Figure 51. Remove the battery pack
Screw specifications
M2 x L3.5
Go to https://support.lenovo.com/partslookup
part:
Battery pack

Remove the solid-state drive (SSD) module

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 60
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw. Remove the SSD and SSD bracket by pulling it away from the slot.
Figure 52. Remove the SSD and SSD bracket
62
Hardware Maintenance Manual
Number of screws
3
to look up the Lenovo part number of the following replacement