KI Sift Disassembly Instructions

Disassembly Instructions
®
Sift Task Arm Chair

Material Type:

A .Steel
Fasteners (not shown) are Material Type A: Steel
Required
Tools
Safety Glasses
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
B. Aluminum C. Plastic
Gloves Rubber Mallet
Channel Lock Pliers

Procedure:

1. Remove the chair base from the underside of the chair using
a rubber mallet.
2. Twist out the pneumatic height adjustment cylinder from the
seat mechanism assembly using pliers
Caution: contents under pressure!
(continued on next page)
A

General Notes:

1. Disassembly time: 15-30 minutes
C
2. This procedure assumes basic familiarity with hand tools and
furniture terminology: no specialized training is required
3. All materials removed and disassembled shall be sorted and
segregated with like materials and disposed of or recycled
according to recycling availability or waste acceptance
4. For items to be recycled, refer to KI's End of Life Recycling
Matrix and KI's End of Life Recovery Options Matrix, available
at www.ki.com
©2013 Krueger International, Inc. All Rights Reserved · P0033-0089 Rev. 0 Page 1 of 2