Safety Information - Britax B-SAFE GEN2 Canadian User Manual

Hide thumbs Also See for B-SAFE GEN2:
Table of Contents

Advertisement

Available languages

Available languages

BRITAX Child Safety, Ltd.

Safety Information

Failure to follow all warnings and instructions
could result in SERIOUS INJURY or DEATH.
Read all instructions before use of the infant carrier.
• The restraint system must be in a rear-facing position when
it is used for an infant.
• Only use carry handle position 1 when using in a vehicle.
See page 33.
• Use only with children who weigh between 1.8 and 15.8 kg
(4 and 35 pounds) and whose height is 81.3 cm (32 inches)
or less.
• Do not use outer harness loops or outer buckle slot for a
child weighing less than 5 kg (11 lbs). See page 30-33.
• Snugly adjust the belts provided with this child restraint
around your child.
• This child restraint must be secured to the vehicle with a
lower connector system, if the restraint system is installed
in a seating position that is equipped with a Lower Universal
Anchorage System (LUAS), or a vehicle seat belt if the
restraint system is installed in a seating position that is not
equipped with a LUAS.
• This child restraint system must be used only in a forward-
facing seating position equipped with a vehicle seat belt or a
lower universal anchorage system.
• Follow all instructions on this child restraint and in the written
instructions located in the base storage compartment. Keep
the instructions with the restraint for future use.
• Register your child restraint with the manufacturer.
• This child seat can only be used in the following classes
of vehicles: multi-purpose passenger vehicles, passenger
cars, or trucks.
4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the B-SAFE GEN2 and is the answer not in the manual?

Questions and answers

Table of Contents