5. Push the infant car seat
firmly into the vehicle seat
while removing all slack
from the vehicle belt.
Carrier Only Installation with Lap Belt
ü The vehicle belt is tight, not twisted, and that the infant
car seat is secure.
ü The infant car seat is secure when it moves less than
1 inch (2.5 cm) front-to-back or side-to-side at the
vehicle belt path.
ü Recline angle is correct. The proper recline angle is
achieved when the level line on the shell is level to the
ground.
ü The infant car seat handle is rotated and locked into
position 1. See page 33.
B-SAFE GEN2 User Guide
CHECKLIST
25