Uninstalling The Base - Britax B-SAFE GEN2 Canadian User Manual

Uninstalling the Base

LUAS Installation
1. Press the lower connector
release button on the top
of the base to loosen the
straps.
2. Press each of the red
release buttons on the
lower connectors and
release vehicle anchors.
3. Store the lower connectors in the storage slots in the
base until reinstalling. Pull on the lower connector straps
in center of base to remove slack.
Lap Shoulder Belt Installation
1. Unbuckle the vehicle belt
and remove from the lock-
off. Pull the belt from the
base belt routes.
Lap Belt Installation
1. Unbuckle the vehicle belt
and pull the belt from the
base belt routes.
B-SAFE GEN2 User Guide
19