Setting Up Synchronized Start Recording For External; Digital Source (Cd, Md, And Dat Only); Resetting The Unit To The Factory Default Settings - Panasonic SL-PR300 Operating Instructions Manual

Special Recording Edit Operations
Setting Up Synchronized Start
Recording for External Digital
Sources (CD, MD, and DAT only)
When performing digital synchronized start recording of an exter-
nally connected digital source, synchronized start recording begins
when a digital signal is encountered in the record pause mode.
However, it is also possible to set this unit to start and stop record-
ing when you are recording a single track.
COMPACT DISC RECORDER SL-PR300
POWER
PHONES
MIN MAX
PLAY MODE CD EDIT CD REC
2,4
3,5
1
When the unit is in stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG on the main unit or press
the P / p button on the remote control until "D-
IN SYNCHRO" appears in the display.
3
Press the SET button (main unit/remote control).
• The current setting appears in the display.
4
Turn the MULTI JOG on the main unit or press
the P / p button on the remote control to select
"START" or "START&STOP".
• When "START" is selected, only the start of the digital signal is
recorded synchronously.
• When "START&STOP" is selected, both the start and stop of
single track recording are controlled by information in the
source digital signal.
• Press the CANCEL button if you do not want to perform this
procedure. The setting is not changed.
5
Press the SET button (main unit/remote control).
• Please note that the type of synchronized recording being per-
formed as set in the above procedure is not indicated in the display
during actual recording. Even when recording is started, only the
"SYNCHRO" indicator remains lit until recording is stopped.
• Even if this setting is set to "START&STOP", recording is con-
cluded automatically if the source is stopped, the disc is
changed, or if a track search is performed.
RQT6087
OPEN / DISC
CLOSE SELECTOR
OPEN /
3 3 CLOSE
DISC
2
DISC 2
DIGITAL CD LINE REC SELECTOR
1
DISC
1
SYNCHRO MENU SET CANCEL
REC/
FINALIZE REC MUTE
1 3,5
CANCEL
DISC SELECTOR
CD1 CD2 CD3
CD REC CD EDIT FINALIZE DISPLAY
1 2 3
4 5 6
7 8 9
_ >
0 10
CONTROL
PLAY
MODE REPEAT CD CD-R/RW
•
REC FADE SYNCHRO
REC MUTE
1
+
PITCH
SET
PITCH–
CANCEL
COMPACT DISC RECORDER
RAK-PR300
Note
• Pressing the SYNCHRO button when unlocked displays
"UNLOCK" in the information window and releases the syn-
chronized condition.
Resetting the Unit to the
Factory Default Settings
By performing the following procedure, all menu settings stored in
the unit are cleared and the unit is reset to the factory default settings.
2,4
MULTI JOG
REC LEVEL
– + COMPACT DISC RECORDER SL-PR300
POWER
MIX BALANCE
PHONES
LINE CD
MIN MAX
PLAY MODE
1
When the unit is in stop mode, press the MENU
button (main unit/remote control).
2
Turn the MULTI JOG control on the main unit or
press the P / p (menu) button on the remote
control until "SET DEFAULT" is shown in the
information display.
3
Press the SET button (main unit/remote control).
• "SET DEFAULT?" is shown in the information display.
• Press the CANCEL button (main unit/remote control) if you do
not want to perform this procedure.
4
Press the SET button (main unit/remote control).
• The unit is reset to the factory default settings and returns to the
stop mode.
DUB- SPEED
FINALIZE
AUTO TRACK
TRACK SPACE
CONVERTER
D- IN SYNCHRO
LINE IN GAIN
OPEN / DISC
CLOSE SELECTOR
3
3
DISC
2
DISC 2
DIGITAL CD LINE
1
DISC
1
CD EDIT CD REC SYNCHRO
FINALIZE
1 3,4
DISC SELECTOR
CD1 CD2 CD3
CD REC CD EDIT FINALIZE DISPLAY
1 2 3
4 5 6
7 8 9
_ >
0 10
CONTROL
PLAY
MODE REPEAT CD CD-R/RW
•
REC FADE SYNCHRO
REC MUTE
1
2
+
PITCH
SET
3,4
PITCH– CANCEL
COMPACT DISC RECORDER
RAK-PR300
At the time of purchase
HIGH (CD- R:4x,CD- RW:2x)
OFF
ON
ON
ON
START
LOW
2
MULTI JOG
REC LEVEL
– +
OPEN /
CLOSE
REC SELECTOR
MIX BALANCE
LINE CD
MENU SET CANCEL
REC/
REC MUTE
CANCEL