Panasonic SL-PR300 Operating Instructions Manual page 27

Recording onto CD-R/RW Discs
1
Select and stop the CD to be recorded.
Example: To record the CD loaded in tray DISC1.
• Only the selected CD is recorded.
1
2
Load a recordable CD-R or CD-RW disc into the
CDR and close the tray.
• The disc is read if required.
3
Press the CD REC button (main unit/remote
control) to start recording. "DISC DUBBING" is
shown in the information display
• When a blank disc is in the CDR tray, "UPDATE OPC" is
shown following "DISC DUBBING".
When "ADD FINALIZE?" is shown in the information
window:
• No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Note
• This message will not be shown if the menu FINALIZE func-
tion setting is "ON". The default setting is "OFF".
The 3-CD changer and CDR start simultaneously. (This is
called synchronized recording)
• Recording starts from the first track of the CD.
Remaining play time of
track being recorded
1 2 3 4 5
CD PLAYER
6 7 8 9 10
CD
CD REC
• When a digital CD is recorded, its signals are recorded in their
original form. Track marks are inserted automatically where
one track changes to the next and track numbers change accord-
ingly.
When the recording of the last song in the CD is
complete, "STOP DUBBING" flashes and recording
automatically stops.
When recorded without canceling "ADD FINALIZE?"
"FINALIZE" is shown in the information window after recording
is stopped and finalization is automatically performed.
Checking a track number during recording
Press the DISPLAY button on the remote control.
Remote Control
DISPLAY
Disc source Track number
Remaining recording time on
CD-R or CD-RW
SYNCHRO
HIGH SPEED AUTO TRACK
DIGITAL REC
CD-R
44.1 kHz L
–
40 30 20 15 10 6 3 0 dB
R
CD-R or CD-RW
track number
To stop the recording at any time
Press the CDR or CD Control STOP s button on the main unit or
the s (stop) button on the remote control. "STOP DUBBING"
flashes in the information display, and the unit stops recording.
Notes
• There is no need to adjust the recording level when recording a
digital signal.
• If the source CD being recorded from the 3-CD changer is itself
a first-generation digital copy, digital recording cannot be per-
formed. When this occurs, the recording type will switch from
digital to analog automatically.
• This type of recording cannot be started during CD playback. It
must start from the beginning of the first track of the CD.
• When the CD REC button is pressed, the function is automati-
cally switched to CD. This means that when the CD to be
recorded has been selected, recording can proceed straightaway.
• Upon completion of recording, "STOP DUBBING" flashes in
the information display. Always wait for the "STOP DUB-
BING" message to be cleared before proceeding with the next
operation.
• When you try to eject the disc from the CDR tray, "FINAL-
IZE?" is shown in the information display. To finalize the disc,
press either the SET or FINALIZE button (main unit/remote
control). To skip the finalization process, press the OPEN/
CLOSE 0 button one more time or the CANCEL button (main
unit/remote control).
• Depending on the disc, the entire CD may not be recorded. In
such a case, use the 1 Disc Dubbing feature (see page 28) to
record.
Performing synchronized one-button recording of
a single track
COMPACT DISC RECORDER SL-PR300
POWER
3
DISC
2
DISC
1
DISC
PHONES
MIN MAX
PLAY MODE CD EDIT CD REC
3
s
1
3
s
1
2
MULTI JOG
REC LEVEL
– +
OPEN / DISC
CLOSE SELECTOR
OPEN /
3 CLOSE
2
DIGITAL CD LINE REC SELECTOR
MIX BALANCE
1
LINE CD
SYNCHRO MENU SET CANCEL
REC/
FINALIZE REC MUTE
DISC SELECTOR
CD1 CD2 CD3
CD REC CD EDIT FINALIZE DISPLAY
1 2 3
4 5 6
7 8 9
_ >
0 10
CONTROL
PLAY
MODE REPEAT CD CD-R/RW
•
REC FADE SYNCHRO
REC MUTE
+
PITCH
SET
PITCH–
COMPACT DISC RECORDER
RAK-PR300
RQT6087