Program Edit Recording - Panasonic SL-PR300 Operating Instructions Manual

Recording onto CD-R/RW Discs
When "ADD FINALIZE?" is shown in the information
window:
• No response (no input) assumes that finalization is to be per-
formed, or you can press the SET button (main unit/remote con-
trol) to confirm that finalization is to be done. Press the
CANCEL button (main unit/remote control) to keep the disc
unfinalized.
Notes
• This message will be shown if the menu FINALIZE function
setting is "ON". The default setting is "OFF".
• When a blank disc is in the CDR tray, "UPDATE OPC" is
shown following "ADD FINALIZE?".
The recording process starts.
• Only the tracks selected from the CDs in the 3-CD changer are
recorded.
• Playback starts from the first track selected. The playing time of
the track and the remaining playing time of the CD-R or CD-
RW disc are shown in the information display.
• As high-speed recording is performed (CD-R 4x, CD-RW 2x),
there is no audio output during the recording process.
When recording completes
"STOP DUBBING" flashes and recording automatically stops.
When recorded without canceling "ADD FINALIZE?"
"FINALIZE" is shown in the information window after recording
is stopped and finalization is automatically performed.
To stop the recording at any time
Press the CD Control STOP s or CDR Control STOP s button on
the main unit or the s (stop) button on the remote control to stop
the recording process. The recording mode is released after "STOP
DUBBING" is shown in the information display.
Notes
• There is no need to adjust the recording level when recording a
digital signal.
• The last program information (the most recently created pro-
gram still stored in the unit's memory) will be erased if the trays
of the 3-CD changer are opened.
RQT6087

Program Edit Recording

This type of recording allows you to make a program of your favor-
ite tracks on any of the CDs loaded in the 3-CD changer in any
order you like.
3 1
COMPACT DISC RECORDER SL-PR300
OPEN /
POWER CLOSE SELECTOR
3
DISC
2
DISC
1
DISC
PHONES
MIN MAX
PLAY MODE CD EDIT CD REC
DISC SELECTOR
CD1
CD REC
1
4
7
0
PLAY
MODE
•
REC
4,5
REC MUTE
COMPACT DISC RECORDER
1
Load CDs in the 3-CD changer.
Note
• To close a tray, press the 0 button for the tray number that is
open. If you press the 0 button for a tray number other than that
for the tray that is open, the program may not be played correctly.
2
Load a recordable CD-R or CD-RW disc in the CDR tray.
• The disc is read.
3
Press the CD EDIT button (main unit/remote
control) twice to select the Program Edit mode.
Main Unit
CD EDIT
• The unit may be required to read the TOC (Table of Contents)
of the CDs loaded in the 3-CD changer. If this is done, "TOC
READING" is shown in the information display.
4,5 2 4,5
MULTI JOG
REC LEVEL
– +
DISC
OPEN /
3 CLOSE
2
DIGITAL CD LINE REC SELECTOR
MIX BALANCE
1
LINE CD
SYNCHRO MENU SET CANCEL
REC/
FINALIZE REC MUTE
7
CANCEL
CD2 CD3
3
CD EDIT FINALIZE DISPLAY
2 3
5 6
8 9
_ >
10
CONTROL
REPEAT CD CD-R/RW
7
FADE SYNCHRO
+
PITCH
SET
PITCH–
CANCEL
RAK-PR300
Remote Control
CD EDIT