Timer Recording (Unattended Recording From A Broadcast Receiver Or Other Source) - Panasonic SL-PR300 Operating Instructions Manual

Timer Operations
Timer Recording (Unattended
Recording from a Broadcast
Receiver or Other Source)
7
COMPACT DISC RECORDER SL-PR300
OPEN /
POWER CLOSE
3
DISC
2
DISC
1
DISC
PHONES
MIN MAX
PLAY MODE CD EDIT CD REC
1
Perform steps 1 to 13 of the Timer Play (wake-
up play) procedure. (see page 43)
2
When "PLAY" is flashing in the information
display, turn the MULTI JOG control on the
main unit to select "REC".
3
Press the SET button.
MULTI JOG
REC LEVEL
–
4
Turn the MULTI JOG control on the main unit
within 30 seconds after step 3 to select the
source to be recorded from.
5
Press the SET button.
MULTI JOG
REC LEVEL
–
+
6
Load a recordable CD-R or CD-RW disc into the
CDR.
• The disc is read.
7
Set the power to standby mode.
• The present time is shown in the information display.
6 2,4
MULTI JOG
REC LEVEL
– +
DISC
SELECTOR
OPEN /
3 CLOSE
2
DIGITAL CD LINE REC SELECTOR
MIX BALANCE
1
LINE CD
SYNCHRO MENU SET CANCEL
REC/
FINALIZE REC MUTE
3,5
SET
+
SET
Notes
• Match the timer of the connected source with the unit's setting.
• Recording starts at the programmed start time, and the power
will be switched to back to the standby mode at the pro-
grammed end time. (The unit power is turned on about two min-
utes before the programmed start time.)
• When an operation is completed once using the Once Timer
mode, the timer program is cleared.
• If digital signals are not received when timed recording starts
using the DIGITAL IN setting, "UNLOCK" is shown in the
information display and no signals will be recorded.
• When using the timer to record a digital satellite broadcast pro-
gram, for instance, check to see if the broadcast station with the
program you want to record is tuned in correctly before pro-
gramming the timer start and end times.
RQT6087