Simple setup
1
Speaker assembly
STEP
Preparing the front and surround speakers
The speaker units, stands, and bases for the front and surround speakers are the same.
Only the lengths of the cables are different.
4 Speaker units
4 Stands
Speaker
unit
Stand
Base
Connecting the cables
Red
Black
Copper
Silver
¡You can put front and surround speakers on the shelf by connecting a speaker directly to the base.
Preparing the center speaker
1 Short cable
1 Sheet of speaker
(for CENTER)
feet (4 feet per sheet)
4 Bases
2 Short cables
(for FRONT L/R)
1
Stand + Base
Stand
Approx.
120 mm
(4-3/4")
Fit into groove.
2
Speaker unit + Stand/Base
Speaker unit
Stand/Base
Fit into groove.
Connect the
speaker cables.
(\ \ above)
2 Long cables
(for SURROUND L/R)
Confirm screw is
securely fastened.
\
Place into
groove.
Base
Confirm screw is
securely fastened.
\
Place into groove.
8 Screws
Connect the
speaker cables.
Position wire in grooves as
necessary avoiding knots.
Connect the
speaker cables.
RQT6945
7