Step 2 Positioning - Panasonic SC-ST1 Operating Instructions Manual

Simple setup
2
STEP Positioning
1 Attach the stickers to the cables
1 Sheet of
speaker-cable
stickers
2
Position the speakers
Setup example
1
Use only supplied speakers
Using other speakers can damage the unit and sound quality will be
negatively affected.
¡Set the speakers up on an even surface to prevent them from
falling. Take proper precautions to prevent the speakers from
falling if you cannot set them up on an even surface.
¡The speaker nets cannot be removed.
Positioning for best effect
How you set up your speakers can affect the bass and the sound
field. Note the following points.
¡Place speakers on flat secure bases.
¡Placing speakers too close to floors, walls, and corners can result
in excessive bass. Cover walls and windows with thick curtain.
RQT6945
8
Front (L)
Approx. 50 mm (2")
Front (R)
short cable
Main unit
Front (L)
5 Center
3
Surround (L)
short cable
Approx. 50 mm (2") Surround (R)
Center
Front (R)
2
Subwoofer
Surround (L)
Note
Keep your speakers at least 10 mm (13/32") away from the system
for proper ventilation.
Center speaker
Vibration caused by the center speaker can disrupt the picture if it is
placed directly on the television. Put the center speaker on a rack or
shelf.
Subwoofer
Place to the right of the television, on the floor or a sturdy shelf so
that it won't cause vibration.
Leave 10 cm (4") on the right for the woofer to be effective.
Leave 10 cm (4") at the rear for ventilation.
long cable
long cable
short cable
4 Surround (R)
¡The front and surround speakers are
the same. Use those you have
connected the short cords to as front
speakers and those
connected the long cords to as
surround speakers.
¡Place the front, center, and surround
speakers at approximately the same
distance from the seating position. The
angles in the diagram are approximate.
you have