Speaker Assembly - Panasonic SC-PT 250 Operating Instructions Manual

Speaker assembly

Preparation
• To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
• For assembly, use a Phillips-head screwdriver.
• Make sure you have all the indicated components before starting assembly, setup, and connection.
• There is no difference between the right and left speakers and stands.
• For optional wall mount, refer to page 9.
2 Front speakers
(with cover plate)
1
Attach the stand to the base.
1 Thread the speaker cable through the base.
For quicker threading, loosely fold the cable in half (do not
crease), pass the folded portion through the hole, and then
pull the rest of the cable through the base.
2 Attach the stand to the base while gently pulling on the
end of the speaker cable.
2
Secure the stand to the base.
Screw
Tighten securely.
Stand
Base
1
Screw
Tighten securely.
8
RQT8043
2 Stands (with cable)
Cable
Base
Stand
Base
Cable
Pull gently.
2
Slide the speaker
cable into the groove.
2 Bases
3
Attach the speaker to the stand.
Pull out the end of the speaker cable and position it
between the ridges. Attach the speaker to the stand.
Speaker
3
Ridges
Stand
2
Cable
4
Secure the speaker to the stand.
Speaker
Stand
5
Connect the speaker cable.
+: White
−: Blue
Press the speaker
cable into the groove.
8 Screws
1
Cover plate
Remove before
attaching the speaker
and keep for wall-
mount use (\ page 9).
Screw
Tighten securely.
Ensure the speaker
cable is
centered in the groove.
Insert the wire fully.
Push!