Speaker Assembly Option - Panasonic SC-PT960 Operating Instructions Manual

[PT960]
: Front speakers
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front
speakers
Leave about 90 mm (3

Speaker assembly option

Thread the speaker cable through
the base.
Leave about 100 mm (3
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 7.
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the appropriate procedure when attaching to a concrete wall or a surface that may not have
strong enough support. Improper attachment may result in damage to the wall or speakers.
e.g. [PT760] [PT954] Front speakers
String (not included)
Thread from the wall to the speaker and tie tightly.
Screw eye
(not included)
Rear of the speaker
2 Stands
(with cable)
Position the cable
between the ridges.
z)
17 /
32
Attach the speaker.
z)
15 /
16
Approx.
150 mm
Wall
(5 29 /
32
2 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push!
Press into the groove.
Tighten securely.
[PT960]
e.g. Front speakers
String (not included)
Thread from the wall to the speaker and tie tightly.
z)
Rear of the speaker
8 Screws
Screw eye
Wall
(not included)
Approx.
150 mm
z)
(5 29 /
32
5