Dvd - Panasonic DMR-E75VS Operating Instructions Manual

Helpful Hints

∫ DVD

DVD Picture
Status messages do not
appear.
The blue background does not
appear.
The 4:3 aspect ratio picture
expands left and right.
Screen size is wrong.
There is a lot of after-image
when playing video.
When playing DVD-Video using
progressive output, one part of
the picture momentarily
appears to be doubled up.
There is no apparent change in
picture quality when adjusted
with the Video menu in the on-
screen menus.
DVD Sound
No sound.
Low volume.
Distorted sound.
Cannot hear the desired audio
type.
Cannot switch audio.
DVD Play
Play fails to start even when
[1, PLAY] is pressed.
Play starts but then stops
immediately.
DVD-Video is not played.
Alternative sound track and
subtitles cannot be selected.
No subtitles.
Angle cannot be changed.
You have forgotten your ratings
password.
Quick View does not work.
The resume play function does not
work.
≥Select "Automatic" in "Status Messages" in the SETUP menu.
≥Select "On" in "Blue Background" in the SETUP menu.
≥Use the TV to change the aspect. If your TV does not have that function, set "Progressive" in
the Video menu to "OFF".
≥Check the settings for "TV Type", "4:3 TV Settings for DVD-Video" or "4:3 TV Settings for
DVD-RAM" in the SETUP menu.
≥Set "MPEG-DNR" in the Video menu to "OFF".
≥Set "Progressive" in the Video menu to "OFF". This problem is caused by the editing method
or material used on DVD-Video, but should be corrected if you use interlace output.
≥The effect is less perceivable with some types of video.
≥Check the connections and settings. Check the input mode on the amplifier if you have
connected one.
≥Press [AUDIO] to select the audio.
≥Turn off V.S.S. in the following cases.
- When using discs that do not have surround sound effects such as Karaoke discs.
- When playing MTS broadcast programs.
≥You cannot change the audio type when a DVD-R is in the disc tray.
≥You cannot change the audio type when playing a DVD-R. (You can select "Main" or "SAP" in
"Select MTS" in the SETUP menu before recording.)
≥You have used a digital connection. Set "Dolby Digital" to "PCM" or connect using audio
cables (analog connection).
≥There are discs which audio cannot be changed because of how the disc was created.
≥Insert the disc correctly with the label facing up.
≥You tried to play a blank DVD-RAM/DVD-R, or discs unplayable on this unit.
≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on
DVD players that are compatible with DVD-RAM. In this case use EP (6H) mode.
≥Some DVD-Video cannot be played when you change the ratings level.
≥The languages are not recorded on the disc.
≥You may have to use the disc's own menus to select languages.
≥When progressive output is on, closed captions cannot be displayed.
≥Subtitles are not recorded on the disc.
≥Turn the Subtitles ON.
≥This function depends on software availability. Angles can only be changed during
scenes where different angles are recorded.
≥With the tray open, keep pressing [:/6] and [5/9] on the main unit
simultaneously for 5 or more seconds.
≥This does not work if the setting is "Off" in "Search Audio & PLAY t1.3".
≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode.
≥This function only works when "PB" is flashing in the unit's display.
≥Memorized positions are canceled when the unit is turned off or when the tray is opened.
The memorized position on the play list is also canceled when the play list and title are
edited.
68
DVD VHS
Page
Page
10–12,
23, 27
12, 44
Page
45
45
41
45
41
41
41
44
41
–
44
–
20
19
43
43
–
–
–
–
40
–
–
44
–
–
21
–