Transfer (Dubbing) From Dvd; One Touch Transfer (Dubbing) (Dvd L Vhs) - Panasonic DMR-E75VS Operating Instructions Manual

Advanced Operations

Transfer (Dubbing) from DVD

DVD/VHS POWER
INPUT SELECT
DVD/VHS
OUTPUT
CANCEL/RESET
SKIP/INDEX
:, 9
∫
PROG/CHECK
DIRECT NAVIGATOR
µ, VHS REC
VHS REC REC MODE
TOP MENU
REC MODE
CHAPTER
JET REW

∫ One Touch Transfer (Dubbing) (DVD l VHS)

You can transfer (dubbing) programs recorded on a disc° onto a tape
with one stroke of the button.
In One-Touch Dubbing, all contents on the disc are automatically
dubbed onto the tapes.
° Available discs for transfer (dubbing) onto tape are DVD-RAM and
non-finalized DVD-R. Most DVD videos cannot be dubbed
because they are copy-guarded.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Insert the disc containing the program to be copied (l 20).
VHS
≥Insert a video cassette with an intact erasure prevention tab.
(l 48)
≥Confirm that the remaining tape time is sufficient for recording.
(l 57)
≥Select the recording mode.
[1]
While both DVD/VHS are stopped,
Press and hold [VHS —, DUBBING] for 3 seconds
or more.
On the main unit, press [VHS —].
≥Check if transfer (dubbing) starts properly.
≥The [DUBBING] indicator on the main unit lights.
≥Dubbing is automatically completed when playback of the disc
is finished or the tape reaches its end.
∫ To stop transfer (dubbing) halfway through
Press [∫, STOP].
≥When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
∫ When transfer (dubbing) is started, the following
operations also start automatically:
≥"Status Messages" on Display ) "Off" (l 45)
≥Recording channel indication on VHS ) "DC"
≥Output to TV ) VHS output
≥Audio output when playing back DVD ) Stereo (L R) [RAM]
TV
POWER
VOLUME
CH
TV/VIDEO
VHS
DVD
VHS DVD
TRACKING/V-LOCK
CH, W, X
AUDIO
VCR Plus+
CM SKIP
SLOW/
REW SEARCH FF
PLAY
1
DISPLAY STATUS TIME SLIP
;
FUNCTIONS
DVD REC ADD/DLT
VHS MENU
DVD ERASE DUBBING
VHS DVD
VHS —
OPEN/CLOSE
∫ Only the following operations are allowed while
transfer (dubbing):
≥Stopping transfer (dubbing) by pressing [∫, STOP].
Note:
≥While One Touch Transfer (Dubbing) is activated, timer recording
cannot be started.
≥When "DVD/VHS Output" is set to "Manual" (l 43), or when DVD
output is selected in starting transfer (dubbing), the output is
switched to VHS automatically at the time when transfer (dubbing)
is started.
- When the transfer (dubbing) is already started, you cannot switch
the output manually.
≥When the transfer (dubbing) is not started or not executed, the
"DUBBING" indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥If you start transfer (dubbing) when "PB" is blinking on the unit's
display, the DVD is dubbed from the beginning of the title which
you stopped.
∫ About Recording VISS
In One-Touch Dubbing from DVD to VHS, the index signal is
automatically recorded for each title. You can search desired
titles with [: ] or [ 9].
60
DVD VHS
TIME SLIP
/k1.3
VHS DVD
DUBBING
CH REC
DUBBING indicator
(l 55)