[[Dvd/Vhs]]; Advanced Operations; Transfer (Dubbing) From Vhs; One Touch Transfer (Dubbing) (Vhs L Dvd) - Panasonic DMR-E75VS Operating Instructions Manual

[[DVD/VHS]]

Advanced Operations

Transfer (Dubbing) from VHS

DVD/VHS POWER
TV
POWER
INPUT SELECT TV/VIDEO
DVD/VHS
OUTPUT
SKIP/INDEX
∫
CANCEL/RESET
PROG/CHECK
DISPLAY
DIRECT NAVIGATOR
VHS REC REC MODE
TOP MENU
REC MODE
CHAPTER
DVD ERASE
JET REW

∫ One Touch Transfer (Dubbing) (VHS l DVD)

[RAM] [DVD-R]
You can transfer (dubbing) programs recorded on a tape onto a disc°
with one stroke of the button.
In One-Touch Dubbing, programs are automatically dubbed onto the
disc from the location of playback on the tape.
° Available discs for transfer (dubbing) from tape are DVD-RAM and
non-finalized DVD-R.
Preparation
≥Select the unit viewing channel (or the AV input) on the TV.
DVD
≥Release protection (disc l 30, cartridge l 18). [RAM]
≥Insert a disc and confirm there is sufficient empty space for
recording on it. (l 20, 47)
≥Select the recording mode.
≥When SAP broadcast program is played back on VHS, the audio
on DVD is recorded according to the settings in "Select MTS" in the
initial settings. (l 44) [DVD-R]
VHS
≥Insert the video cassette containing the program to be copied
(l 48).
[1]
While both DVD/VHS are stopped,
Press and hold [" DVD, DUBBING] for 3 seconds
or more.
On the main unit, press [" DVD].
≥Check if transfer (dubbing) starts properly.
≥The "DUBBING" indicator on the main unit lights.
≥Dubbing is automatically completed when the tape reaches its
end or the disc becomes full.
∫ To stop transfer (dubbing) halfway through
Press [∫, STOP].
≥When transfer (dubbing) is completed, a message indicating the
end of transfer (dubbing) appears on the TV screen and then
disappears a few seconds later.
∫ When transfer (dubbing) is started, the following
operations also start automatically
≥"OSD" on VHS MENU ) "OFF" (l 56)
≥Recording channel indicator on DVD ) "TP"
≥Output to TV ) DVD output
VOLUME
CH
VHS
VHS DVD
DVD
TRACKING/V-LOCK
CH, W, X
SLOW/
REW SEARCH FF
AUDIO
PLAY
1
VCR Plus+
CM SKIP
;
STATUS TIME SLIP
FUNCTIONS
DVD REC ADD/DLT
µ, DVD REC
VHS MENU
DUBBING
" DVD
VHS DVD
OPEN/CLOSE
∫ Only the following operations are allowed while
transfer (dubbing)
≥Stopping transfer (dubbing) by pressing [∫, STOP].
Note:
≥While One Touch Transfer (Dubbing) is activated, a timer recording
cannot be started.
≥When "DVD/VHS Output" is set to "Manual" (l 43), or when VHS
output is selected in starting transfer (dubbing), the output is
switched to DVD automatically at the time when transfer (dubbing)
is started.
- When the transfer (dubbing) is already started, you cannot switch
the output manually.
≥When the transfer (dubbing) is not started or not executed, the
"DUBBING" indicator blinks for about 7 seconds. Check if the unit is
properly prepared.
≥When a Copy-guarded tape is inserted, a message appears on the
display and the recording stops on the spot.
≥If a part of the tape recorded in VP mode is dubbed to disc, noises
may appear at the beginning of the dubbed part.
∫ Dividing a title to be dubbed
In One-Touch Transfer (Dubbing) from VHS to DVD, the title is
divided by index signal detected and then recorded. You can
search desired titles with Direct Navigator's Title View (l 33)
after transfer (dubbing) to DVD.
≥Titles recorded within 15 minutes (25 minutes in VP mode) of
each other may not be divided properly.
≥The recording time may become longer than the original title
depending on the number of index signals.
58
DVD VHS
TIME SLIP
/k1.3
VHS DVD
DUBBING
CH
REC
DUBBING indicator