Frequently Asked Questions - Panasonic DMR-E75VS Operating Instructions Manual

Helpful Hints

Frequently asked questions

Set up
What equipment is necessary to
play multi channel surround
sound?
Are the headphones and speakers
directly connected to the unit?
The TV has both S-VIDEO IN
terminal and COMPONENT VIDEO
IN terminals. Which terminal should
I connect with?
Is my TV progressive output
compatible?
Disc
Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?
Can a DVD-Video that does not
have a region number be played?
Please tell me about DVD-R and
DVD-RW compatibility with this
unit.
Please tell me about CD-R and CD-
RW compatibility with this unit.
Recording
Can I record from a commercially
purchased video cassette or DVD?
Can a DVD-R recorded on this unit
be played on other equipment?
How many times can I write to a
DVD-RAM disc?
Can I record digital audio signals
using this unit?
Can a digital audio signal from this
unit be recorded to other
equipment?
Can I switch to MTS during
recording?
≥DVD-Video:
You can play DVD-Video multi channel surround by digitally connecting an amplifier
equipped with a Dolby Digital and a DTS decoder.
≥DVD-Audio:
This unit plays DVD-Audio in 2 channels. You cannot play multi channel surround sound.
≥You cannot directly connect to the unit. Connect through the amplifier etc.
≥We recommend the COMPONENT VIDEO IN terminal. Component signal outputs the
color difference signals (P /P
B
high fidelity in reproducing colors. If the TV is compatible with progressive output, a high
quality picture can be output because this unit's component video output terminal outputs
a progressive output signal.
≥All Panasonic TV that have 480P input terminals are compatible. Consult the
manufacturer if you have another brand of TV.
≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if their region number does not include "1" or
"ALL".
≥The DVD-Video region number indicates the disc conforms to a standard. You cannot
play discs that do not have a region number.
≥This unit records and plays DVD-R. However, you cannot record onto DVD-R discs that
are finalized.
≥This unit also records and plays 1k–4k recording speed DVD-R discs.
≥This unit does not record or play DVD-RW.
≥You can play CD-R and CD-RW on this unit that are created using a compatible format.
≥You cannot write to a CD-R or CD-RW with this unit.
≥Most commercially sold video cassettes and DVD are copy protected; therefore,
recording is usually not possible.
≥You can play on DVD-R compatible players after finalizing the disc on this unit; however,
due to the condition of the recording, play may not be possible.
≥You can write to the disc approximately 100,000 times depending upon the conditions of
use.
≥You cannot record digital signals. The digital audio terminals on this unit are for output
only.
≥You can record if using the PCM signal. When recording DVD, change the "Digital Audio
Output" settings to the following from the SETUP menu.
- PCM Down Conversion "ON"
- Dolby Digital "PCM"
- DTS "PCM"
However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with a sampling frequency of 48 kHz.
≥You cannot record MP3 signals.
≥With DVD-RAM, you can, and the audio recorded also changes. Just press [AUDIO].
≥With DVD-R, you cannot. Change before recording with the "Select MTS" in the SETUP
menu.
64
) and luminance signal (Y) separately in order to achieve
R
DVD VHS
Page
Page
18, 24
Page
12
–
12
10
–
–
18
–
18
18
18
18
–
31
–
–
44
–
27
44