Check, Change Or Delete Programs; Cautions For Using Timer Recording On Dvd And Vhs - Panasonic DMR-E75VS Operating Instructions Manual

Timer Recording
Note
≥"
" flashes when the unit cannot perform timer recording (non-
recordable disc or protected disc, etc.). Check the disc carefully.
≥The actual time recorded may be longer than the program itself
when TV programs are recorded using VCR Plus_ system.
≥When recording more than one program in a row, for DVD-RAM the
first few seconds, and for DVD-R about the first 30 seconds of all
programs from the second one onwards will not be recorded.
≥If you set "DST" (Daylight Saving Time) to "ON" when manually
setting the clock (l 46), timer recording may not work when
summer switches to winter and vice versa.
≥When the unit is carrying out a timer recording:
- You may utilize playback.
≥When the disc is not inserted, the disc is full or a non-recordable
disc is inserted, the warning message appears because Timer
Recording is disabled.
∫ To stop recording while a program is working
Press [∫, STOP], then [ENTER] within 5 seconds.
≥You can also press and hold [∫] on the main unit for more than 3
seconds to stop recording.
Preparation
≥Press [DVD].

Check, change or delete programs

≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Preparation
≥Press [DVD].
[1]
Press [PROG/CHECK].
TIMER
RECORDING
No CHANNEL DATE
W
F
X
A
Icon explanations (A)
¥
Now recording
W Programs are overlapped. Recording of the program with the
later start time starts before the earlier program finishes
recording.
n You stopped a weekly or daily timer recording. The icon
disappears the next time the timer starts recording.
F The disc was full. (no enough space)
The TV program is not allowed to record by copy-guard.
X Recording stopped (Dirty disc, etc.)
CHECK (B)
OK: Recordable
# (Date): The last day of daily or weeky recording.
!: Recording stopped (no disc or protected disc, etc.)
Press [3, 4] to select the program.
[2]
≥You may also select program by inputting a 2-digit number
using the numeric buttons.
[0] )[5]
e.g.: "5":
[1] )[5]
"15":
≥Use [2, 1] to move to the preceding or following page.
[3] Press [CANCEL/RESET, ¢] to delete,
You cannot delete programs that are currently recording.
or press [ENTER] to change.
The timer recording setting screen appears.
[4]
If you pressed [ENTER] in step 3,
Use [3, 4, 2, 1] to change and press [ENTER].
[5]
Press [RETURN].
4:00 LP
Remaining Recording Time
7/13 TUE 12:57 PM
ON OFF MODE CHECK
New Timer Program
B
For your reference
≥Programs that failed to record are not deleted from the list
immediately (indicated in gray), but are deleted from the list
automatically at 4 a.m. two days later.
≥During timer recording, you can change the end time as long as the
recording mode is not "FR".
Cautions for using timer recording on
DVD and VHS
Timer recording for TV programs cannot be executed on both DVD
and VHS at the same time.
Make sure the timer recording start times do not overlap on both
DVD (l left) and VHS (l 53) timer-programming screens.
When the timer recording settings overlap:
≥When the start time of both timer recordings is the same, the timer
recording of DVD has priority.
≥When tuner channels are specified in timer recordings on both VHS
and DVD, only one timer recording can be started.
≥When the interval between the first timer recording and the second
timer recording on DVD is 1 minute or less as shown below, the
second timer recording on DVD has priority over the timer
recording on VHS even if its start time is later than the timer
recording on VHS.
DVD 2 CH
VHS
29
DVD
1 minute
4 CH
10 CH