Recording From An External Device; Dvd; Vhs - Panasonic DMR-E75VS Operating Instructions Manual

Advanced Operations

Recording from an external device

When connecting to the L2 input terminals on the front of the unit
≥You can also connect to the L1 input terminals on the rear of the unit.
Before connecting any cables, first make sure that the power for
both units is off. Then, after connecting cables, turn on both units.
Note
≥When recording using this unit's input terminals, only the sound
received at the time of recording will be recorded. As long as
secondary audio that is recorded on the media in the external device
is not output to the unit in play, it is not recorded.
≥If the audio output of the other equipment is monaural, connect to L/
MONO. (Both left and right channels are recorded when connected
through L/MONO.)
≥The S-VIDEO terminal achieves a more vivid picture than the VIDEO
terminal.
Preparation
DVD [RAM] [DVD-R]
≥Release protection (disc l 30, cartridge l 18). [RAM]
≥Press [DVD].

VHS

≥Insert a video cassette with an intact erasure prevention tab. (l 48)
≥Press [VHS].
[1]
Press [REC MODE] to select the recording mode.
(DVDl 27, VHSl 51)
≥DVD [RAM] [DVD-R]
- It is also possible to perform Flexible Recording (FR). (l 27)
[2]
While stopped
Press [CH, W, X] or [INPUT SELECT] to select the
input channel.
≥Select L1 or L2.

1 DVD

[3]
Start play on the other equipment.
[4]
Press [¥, DVD REC] at the point where you want
to start recording.
∫ To skip unwanted parts
Press [;, PAUSE] to pause recording. (Press again to restart recording.)
∫ To stop recording
Press [∫, STOP].
For your reference
≥Almost all videos and DVD software on sale have been treated to prevent illegal copying. Such software cannot be recorded.
POWER
EJECT
PULL OPEN VHS DVD
VIDEO IN L/MONO – AUDIO IN – R
L2 S-VIDEO IN
(2)
(1)
(3)
DVD/VHS POWER
INPUT SELECT
INPUT SELECT
∫
CANCEL/RESET
PROG/CHECK
DIRECT NAVIGATOR
µ, VHS REC
TOP MENU
REC MODE
1 VHS
[3]
Press [1, PLAY].
Start playing the video cassette and find the recording start point.
[4]
Press [;, PAUSE], then press [¥, VHS REC].
Put the unit in recording standby mode.
[5]
Start play on the other equipment.
[6]
Press [;, PAUSE] at the point where you want
to start recording.
62
DVD
CH
(1) Audio/Video cable (not supplied)
A Yellow (VIDEO)
B White (L)
C Red (R)
(2) S video cable (not supplied)
(3) Other playback equipment
TV
POWER
VOLUME
CH
TV/VIDEO
VHS
DVD/VHS
VHS DVD
OUTPUT
DVD
TRACKING/V-LOCK
CH, W, X
SLOW/
SKIP/INDEX
REW SEARCH FF
AUDIO
PLAY
1
VCR Pl
DISPLAY STATUS TIME SLIP
;
FUNCTIONS
VHS REC REC MODE DVD REC ADD/DLT
µ, DVD REC
VHS MENU
CHAPTER DUBBING
DVD ERASE
VHS DVD
JET REW
VHS