Check, Change Or Delete A Programme - Panasonic DMR-E55S Operating Instructions Manual

Check, change or delete a programme

≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
Icons
[ This programme is currently recording.
W The times overlap those in another programme.
Recording of the programme with the later start time
starts when the earlier programme finishes recording.
F The disc was full so the programme failed to record.
The material was copy-protected so it was not recorded.
X The programme did not complete recording because the
disc is dirty or some other reason.
TIMER
RECORDING
No. Name Date Start
New Timer Programme
SELECT
ENTER
RETURN
Message displayed in the "Disc space" line
OK: Displayed if the recording can fit in the
remaining space.
> (Date): For recordings made daily or weekly, the display
will show until when recordings can be made (up
to a maximum of one month from the present
time) based on the time remaining on the disc.
! : It may not be possible to record because:
≥the disc is write-protected
≥there is not enough space left
≥the number of possible titles has reached its
maximum.
∫ To change a programme
Press [3, 4] to select the programme and press [ENTER].
( page 18, step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [¢ CANCEL].
∫ To exit the timer recording list
Press [PROG/CHECK].
∫ To put the unit on timer recording standby
Press [F TIMER].
The unit turns off and "F" lights on the unit's display to indicate timer
recording standby has been activated.
≥Programmes that failed to record are displayed gray. They are
automatically deleted from the timer recording list at 4 a.m. two
days later.
Remain 1:58 SP
12:56:00 15. 7. TUE
Disc
Stop Mode
space
Press ENTER to store
new programme.
RQT7444
19