fantastic furniture COMO Manual page 7

Step 6
Slide Drawer Back Panel (P9) into the grooves of Shelf Panel (P5) and Rail (P8). Ensure the
laminated side of the Back Panel is facing outwards.
Step 7
You will need
5 x Cam Nuts 4 x Plastic
(H4) Glides (H15)
10 x Dowels
Hammer
(H1)
Phillips Head
Screwdriver
Insert 10 x Dowels (H1) into
Shelf Panel (P5) and Rails (P6x2,P7x2&P8).
Insert 3 x Cam Nuts (H4) into Shelf Panel (P5)
and 2 x Cam Nuts into Rails (P7x2) as shown.
Rotate the cam nuts so the arrows point towards
the incoming cam bolts. Attach Drawer Right Side
Panel (P4) by tightening all cam nuts with the Phillips Head
Screwdriver. Secure 4 x Plastic Glides (H15) to the bottom of
Drawer Left & Right Side Panels (P3&P4) with the Hammer, approximately
2cm from the end of each panel as shown.
fantasticfurniture.com.au
(P5)
H1
H1
H15
2cm
(P6)
(P3)
(P9)
(P8)
(P4)
H1
H1
H1 H1
H1
(P10)
H4
(P5)
H4
(P6)
(P7)
H15
H15
H1
H1
H4
H4
(P7)
(P8)
H4
H15
PAGE 7
H15