fantastic furniture COMO Manual page 6

Step 4
You will need
2 x Cam Nuts
Phillips Head
(H4)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 2 x Cam Nuts (H4) into Rails (P7x2) as shown. Rotate the cam nuts so
the arrows point towards the incoming cam bolts. Attach Rails (P7x2) to Drawer
Left Side Panel (P3) by tightening all cam nuts with the Phillips Head Screwdriver.
Attach Rails (P6x2) to Drawer Left Side Panel (P3) as shown.
Step 5
You will need
3 x Cam Nuts Phillips Head
(H4) Screwdriver
Insert 3 x Cam Nuts (H4) into Shelf Panel (P5). Rotate the cam nuts so the arrows
point towards the incoming cam bolts. Attach Shelf Panel (P5) to Drawer Left Side
Panel (P3) by tightening all cam nuts with the Phillips Head Screwdriver. Attach
Rail (P8) to Drawer Left Side Panel (P3) as shown.
fantasticfurniture.com.au
(P6)
(P6)
(P3)
(P5)
H4
H4
(P3)
H4
(P7)
H4
H4
(P8)
H4
(P7)
PAGE 6