fantastic furniture COMO Manual page 12

Step 16
You will need
4 x Small Cam
Phillips Head
Nuts (H11)
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Small Cam Nuts (H11) into Left & Right Drawer Sides (P15&P16) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts. Attach Left &
Right Drawer Sides (P15&P16) to Drawer Front (P14) by tightening the cam nuts with the
Phillips Head Screwdriver.
Step 17
Slide Drawer Base (P17) into the grooves
of Left & Right Drawer Sides (P15&P16).
Step 18
You will need
4 x Long
Phillips Head
Screws (H2)
Screwdriver
Attach Drawer Back (P18) to Left & Right
Drawer Sides (P15&P16) with 4 x Long
Screws (H2) by tightening with the Phillips
Head Screwdriver. Ensure the Drawer Base lines
up with the grooves the whole way around the
drawer before securing.
fantasticfurniture.com.au
(P15)
H11
H11
(P14)
(P15)
(P14)
H2
H2
(P15)
(P14)
(P16)
H11
(P17)
(P16)
(P18)
H2
H2
(P17)
(P16)
H11
PAGE 12