Download
Share
Print this page
fantastic furniture House Single Bed Manual
  1. Manuals
  2. Brands
  3. fantastic furniture Manuals
  4. Indoor Furnishing
  5. House Single Bed
  6. Manual
fantastic furniture House Single Bed Manual

fantastic furniture House Single Bed Manual

Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
Version 1.0
House Bed
Single
www.fantasticfurniture.com.au

Advertisement

loading

Related Manuals for fantastic furniture House Single Bed

Summary of Contents for fantastic furniture House Single Bed

  • Page 1 Version 1.0 House Bed Single www.fantasticfurniture.com.au...
  • Page 2 Enjoy Your purchase from Australia’s Best Value Furniture Store www.fantasticfurniture.com.au PAGE 2...

  • Page 3: Assembly Checklist

    Assembly checklist Make sure you have all the required tools. Read through the instructions carefully Never use power tools unless instructed. before you begin. Identify and lay out all of the components Unless instructed, do not fully tighten screws before you begin assembly. until the item is fully assembled.

  • Page 4: What You Need

    What you Need To Assemble the Product DO NOT USE (Additional Tools Required) Phillips Head Screwdriver Mallet Parts List: Box 1 : Legs (P3,P4),Slat (P8), Hardware Pack Box 2: Rails (P1,P2,P5,P6,P7) 6 x Steel 8 x Locking Dowels (H1) (H7) 8 x Locking 8 x Locking 8 x Locking...
  • Page 5 Step 1 You will need: 2 x Steel Dowels (H1) 4 x Bolts (H2) Fixing Kit: How to screw steel dowel? Make sure the opening of steel Insert 2 x Steel Dowels (H1) dowels face incoming bolt. Screw into the Rails (P1 and P2). one bolt into dowel, keep it loose, Attach 4 x Bolts (H2) by using then screw another bolt.
  • Page 6 Step 3 You will need: 4 x Steel Dowels (H1) 8 x Bolts (H2) Insert 2 x Steel Dowels (H1) into the Legs and Rails (P1 and P3; P2 and P4). Attach 4 x Bolts (H2) by using a Phillips head screwdriver. Step 4 You will need: 14 x Wooden...
  • Page 7 Step 5 You will need: (H7) 2 x Locking (H7) 2 x Locking Nuts (H8) (H10) 2 x Locking Screws (H11) Insert 1 x Locking Pins (H7) to each Side Rail (P6) . Insert 1 x Locking Nut (H10) and 1 x Locking Screw (H11), screw the Locking Nuts by using Large Spanner (H8), but don't screw tightly.
  • Page 8 Step 7 Insert 3 x Roof Bars (P7) between two Sides. Step 8 You will need: 6 x Bolts (H4) 6 x Nuts (H5) 1 x Allen (H9) Insert 6 x Bolts (H4) and 6 x Nuts (H5). Make sure the opening of nuts face incoming bolts.

  • Page 9: Job Complete

    Step 9 You will need: 10 x Wood Screws (H3) 4 x Locking Lids (H12) Make sure the inner space of bed frame is square, screw the locking nuts on side rails until tight, put the Slat (P6) on slatholder, use 10 x Wood Screws (H3) to fix the slat.