Download Print this page

fantastic furniture KINGSTON Assembly Instructions Manual

Hide thumbs Also See for KINGSTON:

Download this manual

Assembly Instructions

KINGSTON

Bench

Ver 1.1

Page 1 Assembly Instructions KINGSTON Bench Ver 1.1...
Page 2 WA RNI NG WARN NG FAILURE TO FOLLOW THESE BASIC STEPS CAN LEAD TO DAMAGE THAT IS NOT COVERED BY YOUR WARRANTY Lay out all of the components on a soft surface Read Instructions carefully. as if you were preparing to do a jigsaw puzzle. Check no parts are missing.
Page 3: What You Need
What you Need To Assemble the Body Leg (P2) DO NOT USE Leg (P2) Table Top (P1) 6 x Flat Washer 4 x Wooden dowel 1 x Spanner 6 x Bolt Ø19 x 2 mm Ø8 x 30 mm 13 x 90 mm M8 x 60 mm (H3) (H4)
Page 4 Step 1 Note: Assemble the table on a soft flat surface to prevent the bench top from being damaged during assembly. (H4) (H4) (P1) (H4) (H4) Insert 4 wooden dowels (H4) to the Bench top(P1). Page 4...
Page 5 Step 2 (P2) (P1) Position the Legs (P2) against the Bench top (P1)so the bolt holes line up. Page 5...
Page 6 Step 3 You will need: 1 x Spanner 13 x 90 mm (H1) 6 x Bolt M8x60 mm (H2) 6 x Flat Washer Ø19 x 1 mm (H3) (H3) (H2) (P2) (H1) (P1) Fix 2 x Legs(P2) to the Bench top(P1) using 6 x Flat Washer(H3) and 6 x Bolts (H2) with spanner (H1). Page 6...
Page 7 Step 4 Turn the Bench upright. The job is now complete! In the interest of our enviroment Please dispose of all the packaging thoughtfully. Page 7...