Setting Configuration Switches; Figure 2-2, 1260-100X Configuration Switches - Racal Instruments X Series Manual

Setting
Configuration
Switches
Getting Started 2-4
•
The above group counts as eleven items: the 1260-54 and
1260-22 modules count as one item each, for a total of
three. The 1260-100X carrier is considered as six items,
regardless of the number of plug-ins installed. The 1260-
101 carrier is considered as two items.
together, the total number of controlled items is eleven.
This means that there is still room to add one 1260-Series
switch modules to the group, with the entire group
controlled by one Option-01T. The Option-01T must be
installed in the 1260-54 module in slot 3. In the case where
an Option-01T controls plug-ins residing in two adjacent
carriers, the Option-01T must be installed in the carrier on
the left.
For groups that are larger than twelve, additional
Option-01T modules are used.
Model 1260-100X has its own configuration switches located
on the back panel (See Figure 2-2).

Figure 2-2, 1260-100X Configuration Switches

Slot 8: 1260-101
containing one 1260-145.
1260-100X User Manual
Adapt-a-Switch carrier,
Adding these
Racal Instruments © 2005