1260-100X User Manual
Checking the
Response of
Plug-Ins
Closing and
Opening Relays
Racal Instruments © 2005
To verify that the plug-ins are operational, send the MOD:LIST?
command to the Option-01T. Then read back the response of
the Option-01T.
The Option-01T responds with a message
specifying which plug-ins and 1260-Series modules are under its
control. If the Option-01T does not respond, or does not properly
list the installed switch products, refer to Appendix C:
Troubleshooting.
To use the message-based mode of communication, refer to
Chapter 2 of the Option-01T Instruction Manual for general
commands.
For module-specific commands, refer to the
individual manuals for the plug-ins.
For high-speed operation, use the register-based mode with
Racal
Instruments
information, refer to the VISA and the VXIplug&play Software
section of Chapter 2: Using the Option-01T in the Option-01T
Instruction Manual.
USING THE 1260-100X
VXIplug&play
drivers.
Using the 1260-100X 3-1
Chapter 3
For
detailed