Setting Up Various Displays; The Data Display - Furuno GP-80 Operator's Manual

6. SETTING UP
VARIOUS DISPLAYS

6.1 The Data Display

The user may select what data to display in
four locations on the data display.
SEP 12, 1995 23:59'59" U
POSITION 12 23.456' N
123 23.456' E
WGS84
RNG BRG
223.4
31.23
nm
SPD CSE
12.3
123.4
kt
User-defined
display data #1
User-defined
User-defined
display data #2
display data #4
User-defined
display window
Figure 6-1 Data display
The data the user may display are;
• Altitude (ALT)*
• Average course (AVR CSE)
• Average speed (AVR SPD)
• Course (CSE)
• Course error (dCSE)
• Cross track error (XTE)
• Depth (W.DPT)#
• ETA to waypoint (ETA)
• Range to waypoint (RNG)
• Route time-to-go (RT.TTG)
• Speed (SPD)
• Time-to-go to waypoint (TTG)
• Total route distance (RT.DIST)*
• Trip distance (TRIP)
• Trip elapsed time (TRIP TM)
• Water temperature (W.TMP)#, and
• Velocity to destination (VTD)*
• ETA to route
*ALT: Displayed only in 3D position fix-
ing.
*RT. DIST: Total distance from current
position to ultimate destination. Appears
when following a registered route or a
cursor-created route.
*VTD: When following a route, plus or
minus appears next to indication to denote
which direction the route is being traversed.
# Requires external sensor.
1) Press [MENU ESC] [9] and [1] to dis-
DGPS 3D
TO : 001
MARINE
POINT1
: 002
NEXT
MARINE
POINT2
User-defined
display data #3
2) Press
3) Press t or s to select data to display.
4) Press the [NU/CU ENT] key. To select the
5) Press the [MENU ESC] key.
play the PLOTTER SETUP menu.
PLOTTER SETUP
Memory Apportion
Bearing Ref.
Mag Variation
Calculation
User defined #1
User defined #2
User defined #3
User defined #4
ENT:Enter
MENU:Escape
Figure 6-2 PLOTTER SETUP menu
or to select one of four of "User
defined" (#1, #2, #3, #4).
data to display at other user defined dis-
plays, repeat steps 2 and 3.
Trk = 1000 / 2000Pt
Mag
True
Man
Auto
(07 W) (00 E)
R.L
G.C
SPD
CSE
RNG
BRG
6 – 1