C69 Pitch Adjustment - Furuno FI-304 Operator's Manual

5.3.9

C69 Pitch adjustment

This adjustment is valid only if roll is selected in C73 (you have
to exit and enter the calibration again after C73 is set to Roll).
Adjustment of the pitch offset. Mount the pitch transducer
according to the instructions. Adjust the offset so the pitch is
displaying 00° when the boat is horizontal. By entering a minus
sign [-] in front of the value the roll will be decreased by the
value. When the offset is without a minus sign, it will be added.
The pitch sensor is not yet available (at Mar. 1997).
28