Table of Contents
Advertisement
4.5
Sub-functions
Select sub-function with PLUS or DOWN.
Information text for the sub-function is displayed. You may also "park" your favourite
function so it will automatically be displayed after power on.
Press PAGE and SET together to "park" the displayed function. The display will flash
once to confirm that you have "parked" the function.
4.5.1
Set a steer (STR) reference direct in MEM
The text [STR] and [OFF] is displayed.
This function is used when setting a course to steer.
1. Press SET to set your present course as reference. The text
MEM is then displayed together with the set course.
2. Select STEER mode by pressing PAGE.
The boat is on course when the LCD pointer is displayed as
a vertical line strait up. A course deviation is displayed as a
filled sector.
The LCD segments will lit up one by one to form a "course
deviation" sector of max +/- 30 . Every new press on SET will
set a new course in MEM.
4.5.2
Set a numeric steer reference (STR) in MEM
The text [STR OFF] or [MEM] (if activated), is displayed.
1. Press CLEAR. The text [OFF] or [MEM] is flashing.
2. Select [MEM] with PLUS or MINUS and press KEY, now, a
copy of your present course is flashing, allowing you to
adjust the course to steer.
3. Use PLUS or MINUS to change value, use PAGE to move to
next figure. When set, confirm with SET.
4. Select steer [STR] mode by pressing PAGE.
The MEM function can also be used for racing since it is
supporting both a starboard and a port memory. See
chapter 4.5.7 regarding TACTICAL use.
18
Advertisement
Table of Contents
