Table of Contents
Advertisement
Advanced operation
5.4.6 Recall Profile
About recalling profiles
To recall a profile means to restore the default factory settings (Factory and X Ray profiles) or recall the user
defined profiles.
The available profiles to recall from your display are:
•
Factory
•
X Ray
•
User 1
•
User 2
•
User 3
To recall a profile
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration menu.
3.
Enter the Recall Profile submenu.
4.
Select one of the available profiles to recall and confirm.
5.4.7 Save Profile
About saving profiles
The user can modify the default video parameters associated to each profile and save the new parameter
settings under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be modified, but the
factory default can't be overwritten and can always be recalled through the recall profile menu item.
The available profiles to save in your display are:
•
User 1
•
User 2
•
User 3
To save a profile
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration menu.
3.
Enter the Save Profile submenu.
4.
Select one of the available profiles to save and confirm.
5.5 System menu
5.5.1 Power on DVI 1
About power on DVI 1
This setting allows you to select the pin of DVI port 1 connector on which the +5V DC supply is applied.
The available options are:
•
Disabled
•
+5V on Pin 14
•
+5V on Pin 16
To select the power on DVI 1
1.
Bring up the OSD main menu.
2.
Navigate to the System menu.
3.
Enter the Power on DVI 1 submenu.
4.
Select one of the available options and confirm.
52
K5902135 (451920612565) /04
MDSC-2326
Advertisement
Table of Contents
