Fujitsu PRIMERGY RX2540 M6 Operating Manual page 79

Advantages of the ServerView Installation Manager:
– Wizard-assisted configuration of your server hardware and disk arrays.
– Wizard-assisted installation of all leading server operating systems.
– Wizard-assisted creation of configuration files for unattended installation of
several PRIMERGY servers with identical hardware configurations.
– Installation of drivers and additional software.
The software that can be installed depends on the hardware
configuration of your server. This configuration is detected automatically.
Configuring the controllers
When using the ServerView Installation Manager you can configure the
onboard controller either before or during installation.
▶ Configure the RAID controllers using the ServerView RAID Manager.
▶ If applicable, configure the onboard SATA controller, see
configuring controllers" on page
▶ If applicable, configure the SAS/SATA RAID controller with MegaRAID
functionality, see
Installing the operating system
Descriptions of operating systems not covered in the RAID controller
manual are provided in the corresponding readme files under:
https://www.fujitsu.com/global/support/products/computing/servers/
primergy/drivers/
For Japan:
https://www.fujitsu.com/jp/products/computing/servers/primergy/
downloads/
For more information on installing the server, see the "ServerView
Installation Manager" user guide at
Product - Software - ServerView - Provisioning.
RX2540 M6
80.
"Notes on configuring controllers" on page
Operating Manual
"Notes on
https://support.ts.fujitsu.com
Starting up
80.
under
79