Fujitsu PRIMERGY RX2540 M6 Operating Manual page 62

Starting up
▶ Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered correspond to the details on
the delivery note, see
▶ Ensure that you have all necessary manuals, see
manuals" on page
▶ Components that have been ordered additionally may be delivered loose
with the server. For installing, see the original component documentation.
▶ Install the server in the rack, see
page 64.
▶ Connect the devices to the server. To do this, see
disconnecting cables" on page 69
on page 70.
▶ Connect the server to the mains, see
page 72.
▶ If applicable, install the HDD/SSD modules, see
modules" on page
▶ If applicable, install a second PSU, see
page 93.
▶ Familiarize yourself with the controls and indicators on the front and rear of
the server, see
▶ Configure the server and install the desired operating system and
applications. The following options are available:
▶ Installation with ServerView Installation Manager
Local configuration and installation, see
ServerView Installation Manager" on page
Remote installation, see
Installation Manager" on page
For more information on installing the server (remote or local), see
the "ServerView Installation Manager" user guide at
support.ts.fujitsu.com.
▶ Installation without ServerView Installation Manager
Local configuration and installation, see
ServerView Installation Manager" on page
62
"Unpacking the server" on page
15. If required, print out the PDF files.
87.
"Connectors, controls, and indicators" on page
"Configuring the server with ServerView
Operating Manual
"About availability of
"Installing the server in the rack" on
"Notes on connecting/
and "Connecting devices to the server"
"Connecting the power cord" on
"Installing HDD/SSD
"Installing a second PSU" on
"Configuring the server with
78.
78.
"Configuring the server without
80.
63.
32.
https://
RX2540 M6