Fujitsu PRIMERGY RX2540 M6 Operating Manual page 44

Product description
Status
off
Indication of LAN connection supporting Energy Efficient Ethernet (EEE
mode)
To configure the EEE mode, it is necessary that an add-in LAN card supports
this mode and the connected switch supports this mode as well.
LAN link/transfer indicator (1)
Status
short flashing green 3x, then off
Table 2: LAN indicators if EEE mode is active
LAN speed indicator (2)
Status
short flashing yellow 1x, then 2
seconds off
green off
short flashing green 1x, then 2
seconds off
yellow off
Table 3: LAN indicators if EEE mode is active
44
Description
Data traffic at a transfer rate of 10 Mbit/s.
Description
A LAN connection has been established
(1 Gbit or 100 Mbit) and EEE mode is
active.
Description
Data traffic at a transfer rate of 1 Gbit/s.
Data traffic at a transfer rate of 100 Mbit/s.
Operating Manual RX2540 M6