Advertisement
Step 16
You will need
6 x Small Cam
Flat Head
Nuts (H11)
Screwdriver
Position drawer sides (P7, P8)
and drawer support (P11) onto drawer front (P6).
Insert 6 x small cam nuts (H11)
into drawer sides (P7, P8) and drawer support (P11).
Rotate the cam nuts so the arrows point towards
the incoming cam bolts.
Using a flat head screwdriver, turn clockwise to lock..
Step 17
Slide drawer base (P10)
into the grooves on panels of (P6, P7, P8).
Step 18
You will need
Phillips Head
6 x Screws
Screwdriver
38mm (H13)
Attach drawer back (P9) to assembled drawer
with 6 x screws (H13),
using a phillips head screwdriver as shown.
fantasticfurniture.com.au
Ensure the pre-drilled holes
on drawer side panels (P7, P8)
align with holes on back panel (P9),
and the holes on back panel (P9)
align with the holes on
drawer support (P11).
(P11)
(P8)
H11
H11
(P8)
(P9)
H13
(P8)
(P7)
(P6)
H11
H11
(P10)
(P7)
(P6)
H13
H13
(P7)
(P11)
Page 13
Advertisement
