Plugging In Your Audio; Connecting Atem Converters Via Optical Fiber Cables; Confirming Your Video Signal - Blackmagicdesign ATEM Camera Converter Installation And Operation Manual

Getting Started
6
OPTICAL
Connect external audio equipment to ATEM Camera Converter
via TRS phone connectors.
Optical fiber patch cord with two LC connectors.
PGM
OPTICAL VIDEO
ATEM Camera Converter's optical fiber SFP module.
OPTICAL VIDEO
When a valid SDI or HDMI signal is present, you'll see ATEM
Camera Converter's Video status indicator illuminated.
All manuals and user guides at all-guides.com
OPTICAL VIDEO
PGM
VIDEO
PTT
PTT
PGM
PGM
PTT

Plugging in your Audio

ATEM Camera Converter supports 2 channels of camera audio, which are carrie
of the optical fiber SDI connection. By default, ATEM Camera Converter uses
your camera's microphone. However, if you want to plug in an external audio s
equipment to ATEM Camera Converter's two balanced 1/4" TRS inputs. When e
it will be used instead of the embedded camera audio.
The 1/4" TRS connectors accept stereo analog audio at microphone level and ar
1 & 2 of the optical fiber SDI connection.

Connecting ATEM Converters via Optical Fiber Cables

You'll now want to connect your ATEM Camera Converter to a second Cam
Studio Converter via duplex single mode optical fiber cables with LC connec
cables are typically known as a patch cord and have the connectors' position
optical out is connected to optical in on each unit.
Plugging in Optical Fiber LC Connectors
To plug optical fiber connectors into your ATEM Converters:
Step 1. Plug one end of the patch cord to your ATEM Camera Converter's SFP
Step 2. Plug the other end of your patch cord to the SFP module on the second
If you are connecting multiple cameras to an ATEM Studio Converter, choose a
for each camera. For example, when connecting camera 1, connect to ATEM S
module.

Confirming Your Video Signal

When your ATEM Camera Converter is powered, a camera is plugged in, and a
present, you'll see the control panel Video status indicator illuminated. Additiona
connected and the PGM button set for camera video, your camera output will be
your ATEM Camera Converter is working.
PTT
PTT