Setting The Camera Number; Mounting Atem Camera Converter - Blackmagicdesign ATEM Camera Converter Installation And Operation Manual

Using ATEM Camera Converter
12
PGM
VIDEO
PGM
OPTICAL VIDEO
Camera Number button.
ATEM Camera Converter can be clipped to your belt, mounted
on a tripod arm, or rest on its rubber feet on a desk.
All manuals and user guides at all-guides.com
PTT
PTT

Setting the Camera Number

If you want your ATEM Camera Converter to receive tally signals from an ATEM
the camera number on your ATEM Camera Converter. This ensures the switcher
correct ATEM Camera Converter. The camera number can be set to a value of 99
be connected to a series of looped ATEM Studio Converters.
To set the camera number with the camera number button, press and hold
light flashes 3 times. This will reset the camera number to camera 1. Each subs
will increment the camera number by 1. For example, if you want to set your A
camera number 5, reset the camera number to 1 and then add 4 button presses
To test if camera number 5 is set correctly, have the ATEM switcher operator s
the program output. If your camera number is set correctly, the tally lights wi
Camera Converter.
Similarly, if you want to test what camera number your ATEM Camera Conver
switcher operator to switch camera inputs to the program output until your
switcher operator can then confirm your camera number.

Mounting ATEM Camera Converter

When your camera needs to be mobile, connect your cables to ATEM Camer
the integrated belt clip on to your belt. For stationary shots, ATEM Camera Conv
tripod arm with either of its standard 3/8" or 1/4" thread inserts. If you want to s
on a desk using its rubber feet, undo the two 2.5 hex socket screws and remove